Chapter 6 Connection Status
Nebula Mobile Router User’s Guide
99
6.1.5 Cloud Control Status
Use this screen to enable or disable Nebula Discovery. You can also view the Internet connection status,
Nebula connection status and the Zyxel Device registration status in this screen.
Figure 50 Cloud Control Status
When the Zyxel Device is being managed by NCC, the Cloud Control Status will appear as the following.
Figure 51 Cloud Control Status – NCC Managed
Physical Cell ID This displays the Physical Cell ID (PCI) of the SCC.
UL Bandwidth
(MHz)
This shows the uplink cellular channel bandwidth from the Zyxel Device to the base station.
According to 3GPP specifications, the bandwidths defined by the standard are 1.4, 3, 5, 10, 15,
and 20 MHz. The wider the bandwidth the higher the throughput.
DL Bandwidth
(MHz)
This shows the downlink cellular channel bandwidth from the base station to the Zyxel Device.
According to 3GPP specifications, the bandwidths defined by the standard are 1.4, 3, 5, 10, 15,
and 20 MHz. The wider the bandwidth the higher the throughput.
RFCN This displays the Radio Frequency Channel Number of DL carrier frequency used by the SCC.
Band This displays the current cellular band used by the SCC.
RSSI This displays the cellular signal strength between an associated cellular station and the Zyxel
Device for this SCC.
RSRP This displays the Received Signal Code Power of the SCC.
RSRQ This displays the Reference Signal Receive Quality of the SCC.
SINR This displays the Signal to Interference plus Noise Ratio (SINR) of the SCC.
Table 21 Cellular Info: Detailed Information (continued)
LABEL DESCRIPTION
To Next Page
Loading...
