ZyXEL Communications Nebula LTE3301-PLUS - Nebula FWA710; Nebula LTE3301-PLUS; Panel Ports

Chapter 2 Hardware Panels
Nebula Mobile Router User’s Guide
31
2.2.6 Nebula FWA710
Figure 11 Nebula FWA710 LEDs
The following are the LED descriptions for your Nebula FWA710.
2.3 Panel Ports
The following figures show the panel ports and buttons of the Zyxel Device.
2.3.1 Nebula LTE3301-PLUS
Figure 12 Nebula LTE3301-PLUS
Table 8 Nebula FWA710 LED Behavior
LED COLOR STATUS DESCRIPTION
Cellular Signal
Strength
Green On The signal strength is excellent.
Amber On The signal strength is fair.
Red On The signal strength is weak.
Blinking There is no cellular signal, or signal strength is below the weak
level.
Status Green On The Zyxel Device is connected to the Internet.
Blinking The Zyxel Device is trying to connect to the Internet.
Off The Zyxel Device is not receiving power.
Amber On The WiFi is on.
Red On There is a system failure.
Blinking The Zyxel Device is booting.
Green/
Amber/
Red
Looping Firmware upgrade is in progress.