Chapter 5 Web Interface Tutorials
Nebula Mobile Router User’s Guide
72
5.4 Cellular Network Setup
This section shows you how to set up a cellular network.
5.4.1 Setting up a Cellular Network Connection
This section gives you an example on how to connect to the Internet using over a cellular connection.
1 Insert a SIM Card into your Zyxel Device SIM slot. Make sure this SIM card has an active data plan with
your Internet Service Provider (ISP).
2 Connect your Zyxel Device to your computer, and log into the Web Configurator.
3 If your SIM has a PIN Code, enter this code in the Network Setting > Broadband > Cellular SIM screen.
Use the Home screen to check the Internet Status (IPv4) or Internet Status (IPv6). If it shows Connected
this means your Internet connection is up.
5.4.2 Setting up a Cellular APN setting
You can define an APN (Access Point Name) which is a connection profile with the parameters you
need to connect to a cellular network.
Click Network Setting > Broadband > Cellular APN to display the following screen.
Click the Edit icon ( ) in the Cellular APN screen, the following screen appears.
To Next Page
Loading...
