Chapter 37 Troubleshooting
Nebula Mobile Router User’s Guide
316
2 Reboot the Zyxel Device.
3 If you are connecting a USB hard drive that comes with an external power supply, make sure it is
connected to an appropriate power source that is on.
4 Reconnect your USB device to the Zyxel Device.
37.8 UPnP Problems
My computer cannot detect UPnP settings from the Zyxel Device.
1 Make sure that UPnP is enabled in your computer. For Windows 10, see Section 9.7 on page 176.
2 On the Zyxel Device, make sure that UPnP is enabled on the Network Settings > Home Networking >
UPnP screen. See Section 9.4 on page 171 for details.
3 Disconnect the Ethernet cable from the Zyxel Device’s Ethernet port or from your computer.
4 Reconnect the Ethernet cable.
5 Restart your computer.
37.9 Getting More Troubleshooting Help
Search for support information for your model at www.zyxel.com and community.zyxel.com for more
troubleshooting suggestions.
To Next Page
Loading...
