ZyXEL Communications Nebula LTE3301-PLUS - Page 117

Chapter 7 Broadband
Nebula Mobile Router User’s Guide
117
Figure 66 Network Setting > Broadband > Cellular APN > Edit APN
The following table describes the fields in this screen.
Table 31 Network Setting > Broadband > Cellular APN > Edit APN
LABEL DESCRIPTION
Enable Click this to enable ( ) the APN on the Zyxel Device
APN Manual Mode Disable this to have the Zyxel Device configure the APN (Access Point Name) of a
cellular network automatically. Otherwise, Click this to enable ( ) and enter the
APN manually in the field below.
APN This field allows you to display the Access Point Name (APN) in the profile.
Enter the Access Point Name (APN) provided by your service provider. Connections
with different APNs may provide different services (such as Internet access or MMS
(Multi-Media Messaging Service)) and charging method.
You can enter up to 64 printable ASCII characters. Spaces are allowed.
Username Enter the user name. You can enter up to 64 printable ASCII characters. Spaces are
allowed.
Password Enter the password associated with the user name above. You can enter up to 64
printable ASCII characters. Spaces are allowed.