Chapter 14 Interface Grouping
Nebula Mobile Router User’s Guide
216
Figure 142 Network Setting > Interface Grouping > Add/Edit
The following table describes the fields in this screen.
Table 85 Network Setting > Interface Grouping > Add/Edit
LABEL DESCRIPTION
Group Name Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (–) and underscores (_). Spaces are not allowed.
WAN Interfaces
used in the
grouping
Select the WAN interface this group uses. The group can have up to one PTM interface, up to
one ATM interface, up to one ETH interface, and up to one WWAN interface.
Select None to not add a WAN interface to this group.
To Next Page
Loading...
