Chapter 5 Web Interface Tutorials
Nebula Mobile Router User’s Guide
55
1 In this example, configure the following information for the Ethernet connection.
2 Enter the General settings provided by your Internet service provider.
2a Enter a Name to identify your WAN connection.
2b Set the Type to Ethernet.
2c Set your Ethernet connection Mode to Routing.
2d Choose the Encapsulation specified by your Internet service provider. For this example, select IPoE
as the WAN encapsulation type.
2e Set the IPv4/IPv6 Mode to IPv4 Only.
3 Under Routing Feature, enable NAT and Apply as Default Gateway.
4 For the rest of the fields, use the default settings.
5 Click Apply to save your settings.
General
Name My ETH Connection
Type Ethernet
Connection Mode Routing
Encapsulation (Internet
Type)
IPoE
IPv6/IPv4 Mode IPv4 Only
To Next Page
Loading...
