Chapter 8 Web Interface Tutorials – Multy Plus (WSQ60)
Multy WiFi System User’s Guide
180
8.5 Configure the Multy Device’s WiFi Networks
In the The Multy WiFi System you can configure independent WiFi networks with different privileges.
Clients can associate only with the network for which they have security settings (SSID and password).
The following table describes the different Multy Device’s profile networks and their privileges.
Note: A user can only configure the WiFi networks’ security settings if they are connected to
the Admin WiFi network.
1 Click the Navigation Panel icon on the top-left corner ( ), click Settings to open the WiFi screen. Use
each tab in the WiFi menu to configure each of the WiFi networks’ security settings.
Table 21 WiFi Network Privileges
WIFI NETWORK INTERNET ACCESS
2.4G / 5G WIFI
NETWORK
ACCESS TO WEB
CONFIGURATOR
ACCESS TO WIRED LAN
Admin WiFi Yes 2.4G and 5G Yes Yes
Employee WiFi Yes 2.4G and 5G No No
Visitor WiFi Yes, after captive
portal log in.
2.4G and 5G No No
To Next Page
Loading...
