Chapter 8 Web Interface Tutorials – Multy Plus (WSQ60)
Multy WiFi System User’s Guide
194
8.14 Configure a Port Forwarding Rule
Port forwarding is commonly used when you want to use Internet activities such as online gaming, P2P
file sharing, or even hosting servers on your network. It allows a party from the Internet to contact a
specific LAN client on your network correctly. If you want to forward incoming packets to a specific or
appropriate IP address in the private network using ports, set a port forwarding rule.
1 Click the Navigation Panel icon on the top-left corner ( ). From the Settings drop-down list, click
Security, the Firewall screen appears.
2 Click Enable IPv4 Firewall to enable port forwarding.
To Next Page
Loading...
Need help?
General
