Chapter 9 Web Interface Tutorials – Multy M6E (WSQ65)
Multy WiFi System User’s Guide
217
4h IP Type: Select the type (IPv4 or IPv6) of the Source/Destination IP address.
4i Select Device: Select the device you want to block or allow from the drop down list box.
4j Protocol: Select the protocol (ALL, TCP/UDP, TCP, UDP, ICMP or ICMPv6) used to transport the
packets.
4k Custom Source Port: Enter the port number that defines your rule.
4l Custom Destination Port: Enter the port number that defines your rule.
4m Policy: Select whether to (ACCEPT, DROP, or REJECT) the packets.
4n Direction: Select the direction (WAN to LAN, LAN to WAN, WAN to ROUTER, or LAN to ROUTER) of the
traffic to which this rule applies.
5 Select Enable Rate Limit to activate the rules you created. Click OK.
9.3.2 Parental Control
This section shows you how to configure rules for accessing the Internet using parental control.
Note: The style and features of your parental control vary depending on the Multy Device you
are using.
9.3.2.1 Configuring Parental Control Schedule and Filter
Parental Control Profile (PCP) allows you to set up a rule for:
• Internet usage scheduling.
• Websites and URL keyword blocking.
Use this feature to:
• Limit the days and times a user can access the Internet.
• Limit the websites a user can access on the Internet.
This example shows you how to block a user from accessing the Internet during time for studying. It also
shows you how to stop a user from accessing specific websites.
Use the parameter below to configure a schedule rule and a URL keyword blocking rule.
PROFILE NAME
INTERNET ACCESS
SCHEDULE
NETWORK SERVICE SITE / URL KEYWORD
Study Day:
Monday to Friday
Network Service Setting:
Block
Block or Allow the Web Site:
Block the web URLs
Time:
8:00 to 11:00
13:00 to 17:00
Service Name:
HTTP
Website:
gambling
To Next Page
Loading...
