ZyXEL Communications SCR 50AXE - Network Security; Configuring a Firewall Rule

Chapter 9 Web Interface Tutorials – Multy M6E (WSQ65)
Multy WiFi System User’s Guide
215
9.3 Network Security
This section shows you how to configure a Firewall rule, Parental Control rule, and MAC Filter rule.
9.3.1 Configuring a Firewall Rule
You can enable the firewall to protect your LAN computers from malicious attacks from the Internet.
1 Go to the Security > Firewall > General screen.
2 Select IPv4 Firewall/IPv6 Firewall to enable the firewall, and then click Apply.
3 Open the Access Control screen to create a rule.