Chapter 6 Broadband
VMG1312-B Series User’s Guide
100
6.5.1 Edit 802.1x Settings
Use t his screen to edit a 802.1x aut hent icat ion’s set t ings. Click t he Edit icon next to the rule you
want t o edit . The screen shown next appears.
Figure 27 802.1x: Add/ Edit
The following t able describes t he labels in t his screen.
6.6 Technical Reference
The following sect ion cont ains addit ional t echnical inform ation about the Device feat ures descr ibed
in t his chapt er.
Table 14 802.1x: Add/ Edit
LABEL DESCRIPTION
Act ive This field allows you to activat e/ deact ivate t he aut hent ication.
Select t his to enable the aut hent ication. Clear this t o disable this aut hent icat ion without
having t o delet e t he entry.
EAP I dent ity Enter the EAP identit y of t he aut henticat ion.
EAP m ethod This is the EAP m et hod used for t his aut henticat ion.
Enable
Bidirectional
Authenticat ion
Select t his to allow bidirectional aut hent ication.
Certificate Select t he certificate you want t o assign t o t he authent ication. You need t o im port the
cert ificat e in t he Securit y > Cer t ificates > Local Cert ificates screen.
Trusted CA Select t he Trusted CA you want to assign to t he authenticat ion. You need to im port the
cert ificat e in t he Securit y > Cer t ificates > Trust ed CA screen.
Apply Click Apply t o save your changes.
Cancel Click Cance l t o exit t his screen wit hout saving.
To Next Page
Loading...
