Chapter 4 Tutorials
VMG1312-B Series User’s Guide
34
3 Select the Act iv e check box. Ent er t he Gener a l and ATM PVC Configura t ion sett ings as provided
above.
Set t he Type t o ADSL over ATM .
Choose the Enca psula t ion specified by your DSL service provider. For t his exam ple, t he service
provider requires a usernam e and password to est ablish I nternet connection. Therefore, select
PPPoE as t he WAN encapsulation type.
Set t he I Pv6 / I Pv4 Mode to I Pv4 Only.
4 Ent er the account inform at ion provided t o you by your DSL ser vice provider.
5 Configure this rule as your default I nternet connect ion by selecting the Apply a s De fau lt Ga t ew ay
check box. Then select DNS as St a t ic and ent er t he DNS server addresses provided t o you, such as
1 9 2 .1 6 8 .5 .2
( DNS server1) / 1 9 2 .1 6 8 .5 .1 ( DNS server2) .
6 Leave t he rest of the fields t o the default set tings.
Connect ion Mode Routing
Encapsulation PPPoE
I Pv6/ I Pv4 Mode I Pv4
ATM PVC Con figurat ion
VPI / VCI 36/ 48
Encapsulat ion Mode LLC/ SNAP- Bridging
Service Cat egory UBR without PCR
Account I nform at ion
PPP User Nam e 1234@DSL- Ex.com
PPP Password ABCDEF!
PPPoE Service Nam e My DSL
St atic I P Address 192.168.1.32
Ot her s PPPoE Passthrough: Disabled
NAT: Enabled
I GMP Multicast Proxy: Enabled
Apply as Default Gateway: Enabled
To Next Page
Loading...
