Chapter 4 WAN
WAH7003 User’s Guide
31
The following table describes the labels in this screen.
Table 18 WAN > PLMN > 2G/3G Modem
LABEL DESCRIPTION
Mode Select Automatic to have the WAH7003 automatically connect to the first available mobile
network using roaming when it is outside the coverage area of the original service provider’s
network.
Select Manual or Manual failed then Automatic to display the network list and manually
select a preferred network.
Status This field displays whether the mobile network is the preferred network (Current) or not
(Available).
PLMN Number This field displays the PLMN code of the mobile network.
Operator Name This field displays the mobile network name.
Access
Technology
This field displays the mobile telecommunications technology used by the mobile network.
Update Select a network and click this button to use it as the preferred network when the WAH7003
is in roaming mode.
Query This button is available only when you select Manual or Manual failed then Automatic in
the Mode field.
Click this button to update the network list in this screen.
To Next Page
Loading...
