Chapter 26 SNMP
XMG1930 Series User’s Guide
203
Table 91 SNMP Switch Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
stp zyMrstpNewRoot 1.3.6.1.4.1.890.1.15
.3.52.3.1
This trap is sent when the MRSTP root switch
changes.
zyMstpNewRoot 1.3.6.1.4.1.890.1.15
.3.53.3.1
This trap is sent when the MSTP root switch
changes.
zyMrstpTopologyChange 1.3.6.1.4.1.890.1.15
.3.52.3.2
This trap is sent when the MRSTP topology
changes.
zyStpRootGuardDetect 1.3.6.1.4.1.890.1.15
.3.79.3.1
This trap is sent when the STP root switch
detects superior BPDUs on a root guard
enabled port and blocks the port.
zyStpRootGuardRecovered 1.3.6.1.4.1.890.1.15
.3.79.3.2
This trap is sent when a port blocked by root
guard stops sending superior BPDUs and is
enabled again.
zyMstpTopologyChange 1.3.6.1.4.1.890.1.15
.3.53.3.2
This trap is sent when the MSTP root switch
changes.
mactable zyMacForwardingTableFull 1.3.6.1.4.1.890.1.15
.3.48.2.1
This trap is sent when more than 99% of the
MAC table is used.
zyMacForwardingTableFullRec
overed
1.3.6.1.4.1.890.1.15
.3.48.2.2
This trap is sent when the MAC address
switching table has become normal from
full.
rmon RmonRisingAlarm 1.3.6.1.2.1.16.0.1 This trap is sent when a variable goes over
the RMON "rising" threshold.
RmonFallingAlarm 1.3.6.1.2.1.16.0.2 This trap is sent when the variable falls below
the RMON "falling" threshold.
classifier zyAclV2ClassifierLogNotificatio
n
1.3.6.1.4.1.890.1.15
.3.105.4.1
This trap is sent when the Switch detects
classifier log information.
rip zyRipExceedMaxDynamicRout
e
1.3.6.1.4.1.890.1.15
.3.74.2.1
This trap is sent when the maximum allowed
number of dynamic routes learned through
RIP has been exceeded.
ospf zyOspfExceedMaxDynamicRo
utePath
1.3.6.1.4.1.890.1.15
.3.57.3.1
This trap is sent when the maximum allowed
number of dynamic routes learned through
OSPF has been exceeded.
To Next Page
Loading...
