ZyXEL Communications XMG1930-30 - Activate IEEE 802.1 X Security

Chapter 76 Port Authentication
XMG1930 Series User’s Guide
542
Figure 393 MAC Authentication Process
Note: To enable port authentication, first activate the port authentication methods (both on
the Switch and the ports), then configure the RADIUS server settings in the SECURITY>
AAA > RADIUS Server Setup screen.
76.2 Activate IEEE 802.1x Security
Use this screen to activate IEEE 802.1x security. Click SECURITY > Port Authentication > 802.1x to display
the configuration screen as shown.
Figure 394 SECURITY > Port Authentication > 802.1x