Chapter 46 Static Multicast Forwarding
XMG1930 Series User’s Guide
323
Figure 223 SWITCHING > Static Multicast Forwarding By IP
The following table describes the labels in this screen.
46.3.1 Add/Edit a Static Multicast Address By IP
Use this screen to configure ports and VLAN to receive the multicast stream with this multicast IPv4
address.
Click Add/Edit, or select an entry and click Add/Edit in the SWITCHING > Static Multicast Forwarding By IP
to display this screen.
Figure 224 SWITCHING > Static Multicast Forwarding By IP > Add/Edit
The following table describes the labels in this screen.
Table 160 SWITCHING > Static Multicast Forwarding By IP
LABEL DESCRIPTION
Index This is the index number of the static multicast IP address rule.
Name This field displays the descriptive name for identification purposes for a static multicast IP address-
forwarding rule.
IP Address This field displays the multicast IP address that identifies a multicast group.
VID This field displays the ID number of a VLAN group to which frames containing the specified
multicast IP address will be forwarded.
Port This field displays the ports within an identified VLAN group to which frames containing the
specified multicast IP address will be forwarded.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new rule or edit a selected one.
Delete Click Delete to remove the selected rules.
Table 161 SWITCHING > Static Multicast Forwarding By IP > Add/Edit
LABEL DESCRIPTION
Name Enter a descriptive name (up to 32 printable ASCII characters except [ ? ], [ | ], [ ' ], [ " ] or [ , ]) for
this static multicast IPv4 address forwarding rule. This is for identification only.
IP Address Enter a multicast IPv4 address (224.0.0.0 – 239.255.255.255) which identifies the multicast group.
To Next Page
Loading...
