ZyXEL Communications XMG1930-30 - Cluster Management Status; What You Can Do

Chapter 78 MAINTENANCE
XMG1930 Series User’s Guide
561
In the following example, switch A in the basement is the cluster manager and the other switches on the
upper floors of the building are cluster members.
Figure 404 Clustering Application Example
78.4.1 What You Can Do
• Use the Cluster Management Status screen (Section 78.5 on page 561) to view the role of the Switch
within the cluster and to access a cluster member Switch’s Web Configurator.
• Use the Cluster Management Setup screen (Section 78.6 on page 562) to configure clustering
management.
78.5 Cluster Management Status
Use this screen to view the role of the Switch within the cluster and to access a cluster member Switch’s
Web Configurator.
Click MAINTENANCE > Cluster Management in the navigation panel to display the following screen.
Note: A cluster can only have one manager.
Cluster Manager The Switch through which you manage the cluster member
switches.
Cluster Members The switches being managed by the cluster manager Switch.
Table 318 Zyxel Clustering Management Specifications