ZyXEL Communications XMG1930-30 - Page 29

Chapter 1 Getting to Know Your Switch
XMG1930 Series User’s Guide
29
Table 2 Switch License
LICENSE NAME UNLOCKED SERVICES MENU LOCATION
Access L3 License IP Address table (up to 1,024 entries) MONITOR > IP Table
MAC Address table (up to 32,000 entries) MONITOR > MAC Table
SNMP (Simple Network Management Protocol) Trap SYSTEM > SNMP > SNMP Trap Group
SYSTEM > SNMP > SNMP Trap Port
Private MIB (Management Information Base) www.zyxel.com (Support >
Download Library > MIB File)
Auto PD (powered device) Recovery PORT > Auto PD Recovery
Flex Link (primary/backup link) PORT > Flex Link
OAM (Operations, Administration and Maintenance) PORT > OAM
Asymmetric Flow Control PORT > Port Setup > Port Setup: Flow
Control
BPDU (Bridge Protocol Data Units) Control PORT > Port Setup > Port Setup:
BPDU Ctrl
SYSTEM > Switch Setup: Bridge
Control Protocol Transparency
ZULD (Zyxel Unidirectional Link Detection) PORT > ZULD
MAC Pinning SWITCHING > MAC Pinning
IGMP Snooping Smart Forward SWITCHING > Multicast > IPv4
Multicast > IGMP Snooping: IGMP
Snooping Smart Forward Active
IPv6 Multicast SWITCHING > Multicast > IPv6
Multicast
MLD Snooping Proxy SWITCHING > Multicast > IPv6
Multicast > MLD Snooping-proxy
MVR (Multicast VLAN Registration) configuration SWITCHING > Multicast > MVR
Diffserv (Differentiated Services) SWITCHING > QoS > Diffserv
sFlow (sampled Flow) agent SWITCHING > sFlow
MRSTP (Multiple Rapid Spanning Tree Protocol) SWITCHING > Spanning Tree
Protocol > Spanning Tree Protocol
Status
Subnet / Protocol / MAC Based VLANs SWITCHING > VLAN > Subnet Based
VLAN Setup
SWITCHING > VLAN > Protocol
Based VLAN Setup
SWITCHING > VLAN > MAC Based
VLAN Setup
802.1Q Static VLANs (up to 4,094 entries) SWITCHING > VLAN > VLAN Setup >
Static VLAN > Add/Edit
VLAN Isolation / Mapping / Stacking SWITCHING > VLAN Isolation
SWITCHING > VLAN Mapping
SWITCHING > VLAN Stacking
Selective QinQ SWITCHING > VLAN Stacking >
Selective QinQ
DHCP Server Guard NETWORKING > DHCP > DHCP
Server Guard
IPv4 Static Route (up to 64 entries) NETWORKING > Static Routing > IPv4
Static Route > Add/Edit