Chapter 66 Access Control
XMG1930 Series User’s Guide
462
Figure 328 SECURITY > Access Control > Service Access Control (Without Access L3 License)
Figure 329 SECURITY > Access Control > Service Access Control (With Access L3 License)
The following table describes the fields in this screen.
Table 260 SECURITY > Access Control > Service Access Control
LABEL DESCRIPTION
Services Services you may use to access the Switch are listed here.
Active Enable the switch button for the corresponding services that you want to allow to access the
Switch.
Service Port For Telnet, SSH, FTP, HTTP or HTTPS services, you may change the default service port by typing
the new port number in the Service Port field. If you change the default port number then you
will have to let people (who wish to use the service) know the new port number for that
service.
Timeout Enter how many minutes (from 1 to 255) a management session can be left idle before the
session times out. After it times out you have to log in with your password again. Very long idle
timeouts may have security risks.
To Next Page
Loading...
