Chapter 79 Networked AV Mode
XMG1930 Series User’s Guide
584
Figure 429 MONITOR > System Information
The following table describes the labels in this screen.
Table 330 MONITOR > System Information
LABEL DESCRIPTION
System Information
System Name This field displays the descriptive name of the Switch for identification purposes.
Product Model This field displays the product model of the Switch. Use this information when searching for
firmware upgrade or looking for other support information in the website.
ZyNOS F/W
Version
This field displays the version number of the Switch 's current firmware including the creation date.
Ethernet
Address
This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
CPU Utilization
Current (%)
CPU utilization quantifies how busy the system is. Current (%) displays the current percentage of
CPU utilization.
Memory Utilization
Memory utilization shows how much DRAM memory is available and in use. It also displays the current percentage
of memory utilization.
Name This field displays the name of memory pool.
Total (byte) This field displays the total number of bytes in this memory pool.
Used (byte) This field displays the number of bytes being used in this memory pool.
Utilization
(%)
This field displays the percentage (%) of memory being used in this memory pool.
Hardware Monitor
Temperature
(C/F)
BOARD/MAC/PHY refers to the location of the temperature sensor on the Switch printed circuit
board.
Status This field displays Normal for temperatures below the threshold and Error for those above.
To Next Page
Loading...
