ZyXEL Communications ZyWALL 2 Plus - Figure 54 Tutorial Example: NAT Address Mapping Edit: Many-To-One; Figure 55 Tutorial Example: NAT Address Mapping Done

Chapter 4 Tutorial
ZyWALL 2 Plus User’s Guide
101
Figure 54 Tutorial Example: NAT Address Mapping Edit: Many-to-One
10After the configurations, the Address Mapping screen looks as shown. You still have
one IP address (1.2.3.7) that can be assigned to another internal server when you expand
your network.
Figure 55 Tutorial Example: NAT Address Mapping Done
Note: To allow traffic from the WAN to be forwarded through the ZyXEL Device, you
must also create a firewall rule. Refer to Section 4.2.5 on page 103 for more
information.