ZyXEL Communications ZyWALL 2 Plus - Figure 179 Hub-And-Spoke VPN Example; Hub-And-Spoke Example VPN Rule Addresses; Hub-And-Spoke VPN Requirements and Suggestions

Chapter 14 IPSec VPN
ZyWALL 2 Plus User’s Guide
273
Figure 179 Hub-and-spoke VPN Example
14.17.2 Hub-and-spoke Example VPN Rule Addresses
The VPN rules for this hub-and-spoke example would use the following address settings.
Branch Office A:
• Remote Gateway: 10.0.0.1
• Local IP address: 192.168.167.0/255.255.255.0
• Remote IP address: 192.168.168.0~192.168.169.255
Headquarters:
Rule 1:
• Remote Gateway: 10.0.0.2
• Local IP address: 192.168.168.0~192.168.169.255
• Remote IP address:192.168.167.0/255.255.255.0
Rule 2:
• Remote Gateway: 10.0.0.3
• Local IP address: 192.168.167.0~192.168.168.255
• Remote IP address: 192.168.169.0/255.255.255.0
Branch Office B:
• Remote Gateway: 10.0.0.1
• Local IP address: 192.168.169.0/255.255.255.0
• Remote IP address: 192.168.167.0~192.168.168.255
14.17.3 Hub-and-spoke VPN Requirements and Suggestions
Consider the following when implementing a hub-and-spoke VPN.
The local IP addresses configured in the VPN rules cannot overlap