ZyXEL Communications ZyWALL 2 Plus - Firewall Default Rule (Router Mode); Figure 124 Using IP Alias to Solve the Triangle Route Problem; Figure 125 SECURITY > FIREWALL > Default Rule (Router Mode)

Chapter 11 Firewall
ZyWALL 2 Plus User’s Guide
191
Figure 124 Using IP Alias to Solve the Triangle Route Problem
11.7 Firewall Default Rule (Router Mode)
Click SECURITY > FIREWALL to open the Default Rule screen.
Use this screen to configure general firewall settings when the ZyWALL is set to router mode.
Figure 125 SECURITY > FIREWALL > Default Rule (Router Mode)