ZyXEL Communications ZyWALL 2 Plus - Figure 116 from LAN to VPN Example; Figure 117 Block DMZ to VPN Traffic by Default Example; From VPN Packet Direction

Chapter 11 Firewall
ZyWALL 2 Plus User’s Guide
185
Figure 116 From LAN to VPN Example
In order to do this, you would configure the SECURITY > FIREWALL > Default Rule
screen as follows.
Figure 117 Block DMZ to VPN Traffic by Default Example
11.3.2 From VPN Packet Direction
You can also apply firewall rules to traffic that comes in through the ZyWALL’s VPN tunnels.
The ZyWALL decrypts the VPN traffic and then applies the firewall rules. From VPN means
traffic that came into the ZyWALL through a VPN tunnel and is going to the selected “to”
interface.