ZyXEL Communications ZyWALL 2 Plus - Figure 334 NAT Example 1; Figure 335 Menu 4: Internet Access & NAT Example

Chapter 35 Network Address Translation (NAT)
ZyWALL 2 Plus User’s Guide
509
Figure 334 NAT Example 1
Figure 335 Menu 4: Internet Access & NAT Example
From menu 4 shown above, simply choose the SUA Only option from the Network Address
Translation field. This is the Many-to-One mapping discussed in Section 35.4 on page 508.
The SUA Only read-only option from the Network Address Translation field in menus 4
and 11.1.2 is specifically pre-configured to handle this case.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Login Server= N/A
Relogin Every (min)= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel: