ZyXEL Communications ZyWALL 2 Plus - Figure 60 Tutorial Example: Firewall Default Rule; Figure 61 Tutorial Example: Firewall Rule: WAN to LAN

Chapter 4 Tutorial
ZyWALL 2 Plus User’s Guide
104
1 Click SECURITY > FIREWALL.
2 Make sure the firewall is enabled and traffic from the WAN to the LAN is dropped.
Figure 60 Tutorial Example: Firewall Default Rule
3 Go to the Rule Summary screen.
4 Select the WA N t o L A N packet direction and click the Insert button to create a new
firewall rule.
Figure 61 Tutorial Example: Firewall Rule: WAN to LAN
5 Configure a firewall rule to allow traffic from the WAN to the web server.
Enter a descriptive name (W-L_Web for example).
Select Any in the Destination Address(es) box and click Delete.
Select Single Address as the destination address type. Enter 192.168.1.12 and click Add.