ZyXEL Communications ZyWALL 2 Plus - Figure 118 from VPN to LAN Example; Figure 119 Block VPN to LAN Traffic by Default Example

Chapter 11 Firewall
ZyWALL 2 Plus User’s Guide
186
For example, by default the firewall allows traffic from any VPN tunnel to go to any of the
ZyWALL’s interfaces, the ZyWALL itself and other VPN tunnels. You could edit the From
VPN To LAN default firewall rule to silently block traffic from the VPN tunnels from going
to the LAN computers.
Figure 118 From VPN to LAN Example
In order to do this, you would configure the SECURITY > FIREWALL > Default Rule
screen as follows.
Figure 119 Block VPN to LAN Traffic by Default Example