ZyXEL Communications ZyWALL 2 Plus - IP Static Route Setup

ZyWALL 2 Plus User’s Guide
497
CHAPTER 34
IP Static Route Setup
This chapter shows you how to configure static routes with your ZyWALL.
34.1 IP Static Route Setup
Enter 12 from the main menu. Select one of the IP static routes as shown next to configure IP
static routes in menu 12.1.
" The first static route entry is for the default WAN route on the ZyWALL. You
cannot modify or delete a static default route. The default route is disabled after
you change the static WAN IP address to a dynamic WAN IP address. The “-”
before a route name indicates the static route is inactive.
Figure 321 Menu 12: IP Static Route Setup
Now, enter the index number of the static route that you want to configure.
Menu 12 - IP Static Route Setup
1. Reserved
2. test1
3. -test2
4. ________
5. ________
6. ________
7. ________
8. ________
9. ________
10. ________
11. ________
12. ________
Enter selection number: