ZyXEL Communications ZyWALL 2 Plus - Figure 64 Tutorial Example: Firewall Rule: WAN to LAN Address Edit for Mail Server

Chapter 4 Tutorial
ZyWALL 2 Plus User’s Guide
106
7 Click the Insert button to configure a firewall rule to allow traffic from the WAN to the
mail server.
Enter a descriptive name (W-L_Mail for example).
Select Any in the Destination Address(es) box and click Delete.
Select Single Address as the destination address type. Enter 192.168.1.13 and click Add.
Figure 64 Tutorial Example: Firewall Rule: WAN to LAN Address Edit for Mail Server
8 Select Any(All) in the Available Services box on the left, and click >> to add it to the
Selected Service(s) box on the right. Click Apply.