ZyXEL Communications ZyWALL 2 Plus - Figure 136 My Service Firewall Rule Example: Rule Summary; Figure 137 My Service Firewall Rule Example: Rule Edit

Chapter 11 Firewall
ZyWALL 2 Plus User’s Guide
206
4 In the Rule Summary screen, type the index number for where you want to put the rule.
For example, if you type 6, your new rule becomes number 6 and the previous rule 6 (if
there is one) becomes rule 7.
5 Click Insert to display the firewall rule configuration screen.
Figure 136 My Service Firewall Rule Example: Rule Summary
6 Enter the name of the firewall rule.
7 Select Any in the Destination Address(es) box and then click Delete.
8 Configure the destination address fields as follows and click Add.
Figure 137 My Service Firewall Rule Example: Rule Edit