ZyXEL Communications ZyWALL 2 Plus - Figure 340 Example 3: Menu 15.1.1.1; Figure 341 Example 3: Final Menu 15.1.1

Chapter 35 Network Address Translation (NAT)
ZyWALL 2 Plus User’s Guide
512
The following figure shows how to configure the first rule.
Figure 340 Example 3: Menu 15.1.1.1
Figure 341 Example 3: Final Menu 15.1.1
Now configure the IGA3 to map to our web server and mail server on the LAN.
1 Enter 15 from the main menu.
2 Enter 2 to go to menu 15.2 and configure it as shown in Figure 342 on page 513.
Menu 15.1.1.1 Address Mapping Rule
Type= One-to-One
Local IP:
Start= 192.168.1.10
End = N/A
Global IP:
Start= 10.132.50.1
End = N/A
Press ENTER to Confirm or ESC to Cancel:
Menu 15.1.1 - Address Mapping Rules
Set Name= Example3
Idx Local Start IP Local End IP Global Start IP Global End IP Type
--- --------------- --------------- --------------- --------------- ---
1. 192.168.1.10 10.132.50.1 1-1
2 192.168.1.11 10.132.50.2 1-1
3. 0.0.0.0 255.255.255.255 10.132.50.3 M-1
4. 10.132.50.3 Server
5.
6.
7.
8.
9.
10.
Action= Edit Select Rule=
Press ENTER to Confirm or ESC to Cancel: