Chapter 25 Maintenance
ZyWALL 2 Plus User’s Guide
442
Figure 278 Reset Warning Message
You can also press the hardware RESET button to reset the factory defaults of your
ZyWALL. Refer to Section 2.3 on page 51 for more information on the RESET button.
25.12 Restart Screen
System restart allows you to reboot the ZyWALL without turning the power off.
Click MAINTENANCE > Restart. Click Restart to have the ZyWALL reboot. Restart is
different to reset; (see Section 25.11.3 on page 441) reset returns the device to its default
configuration.
Figure 279 MAINTENANCE > Restart