Chapter 3 Wizard Setup
ZyWALL 2 Plus User’s Guide
71
Figure 17 ISP Parameters: PPTP Encapsulation
The following table describes the labels in this screen.
Table 13 ISP Parameters: PPTP Encapsulation
LABEL DESCRIPTION
ISP Parameters for
Internet Access
Encapsulation Select PPTP from the drop-down list box. To configure a PPTP client, you must
configure the User Name and Password fields for a PPP connection and the
PPTP parameters for a PPTP connection.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the User Name above.
Retype to Confirm Type your password again for confirmation.
Nailed-Up Select Nailed-Up if you do not want the connection to time out.
Idle Timeout Type the time in seconds that elapses before the router automatically
disconnects from the PPTP server.
PPTP
Configuration
My IP Address Type the (static) IP address assigned to you by your ISP.
To Next Page
Loading...
