Remote Switch APP Upgrade Configuration Example 493
Upgrading BOOTROM, please wait...
Upgrade BOOTROM succeeded!
9 Specify the downloaded program as the host software to be adopted when the
switch starts next time.
<4210> boot boot-loader switch.bin
The specified file will be booted next time on unit 1!
<4210> display boot-loader
Unit 1:
The current boot app is: switch.bin
The main boot app is: switch.bin
The backup boot app is:
# Reboot the switch to upgrade the Boot ROM and host software of the switch.
<4210> reboot
Start to check configuration with next startup configuration file,
please wait......
This command will reboot the device. Current configuration may be
lost in next startup if you continue. Continue? [Y/N] y
This will reboot device. Continue? [Y/N] y
To Next Page
Loading...
