EasyManua.ls Logo

3Com 4210 PWR - Page 517

3Com 4210 PWR
567 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote-Ping Configuration Example 515
# Set the probe timeout time to 30 seconds.
[4210-Remote-Ping-administrator-ftp] timeout 30
# Configure the source IP address
[4210-Remote-Ping-administrator-ftp] source-ip 10.1.1.1
# Start the test.
[4210-Remote-Ping-administrator-ftp] test-enable
# Display test results
[4210-Remote-Ping-administrator-ftp] display Remote-Ping results administrat
or
ftp
Remote-Ping entry(admin administrator, tag ftp) test result:
Destination ip address:10.2.2.2
Send operation times: 10 Receive response times: 10
Min/Max/Average Round Trip Time: 3245/15891/12157
Square-Sum of Round Trip Time: 1644458573
Last complete test time: 2000-4-3 4:0:34.6
Extend result:
SD Maximal delay: 0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number: 0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
[4210-Remote-Ping-administrator-ftp] display Remote-Ping history administrat
or
ftp
Remote-Ping entry(admin administrator, tag ftp) history record:
Index Response Status LastRC Time
1 15822 1 0 2000-04-03 04:00:34.6
2 15772 1 0 2000-04-03 04:00:18.8
3 9945 1 0 2000-04-03 04:00:02.9
4 15891 1 0 2000-04-03 03:59:52.9
5 15772 1 0 2000-04-03 03:59:37.0
6 15653 1 0 2000-04-03 03:59:21.2
7 9792 1 0 2000-04-03 03:59:05.5
8 9794 1 0 2000-04-03 03:58:55.6
9 9891 1 0 2000-04-03 03:58:45.8
10 3245 1 0 2000-04-03 03:58:35.9
For detailed output description, see the corresponding command manual.
n
If you are downloading a file from the server, you do not need to specify an FTP
operation type. For details, see
“Configuring FTP test on Remote-Ping client”.
HTTP Test Network requirements
A 3Com Switch 4210 serves as the Remote-Ping client, and a PC serves as the
HTTP server. Perform a Remote-Ping HTTP test between the switch and the HTTP
server to test the connectivity and the time required to download a file from the
HTTP server after the connection to the server is established.

Table of Contents

Related product manuals