1-6
To do… Use the command… Remarks
Configure the number of
probes per test
count times
Optional
By default, each test makes
one probe.
Configure the packet size
datasize size
Optional
By default, the packet size is 56
bytes.
Configure a stuffing character
string
datafill string
Optional
By default, the numbers
between 0 and 255 are stuffed
into datagrams in a cyclically
way.
Configure a test description
description string
Optional
By default, no description
information is configured.
Configure the maximum
number of history records that
can be saved
history-records number
Optional
By default, the maximum
number is 50.
Enable history record
history-record enable
Optional
By default, history record is not
enabled.
Configure the retaining time of
history record
history keep-time keep-time
Optional
By default, the retaining time of
history record is 120 minutes.
Configure statistics interval and
the maximum number of
retained statistics information
statistics { interval interval |
max-group number }
Optional
By default, statistics interval is
120 minutes and up to two
pieces of statistics information
can be retained.
Configure the retaining time of
statistics information
statistics keep-time keep-time
Optional
By default, the retaining time of
statistics information is 120
minutes.
Configure test start time and
lifetime
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now } lifetime
lifetime
Optional
By default,no test start time and
lifetime is configured.
Enable routing table bypass
sendpacket passroute
Optional
By default, routing table bypass
is disabled.
Configure the TTL
ttl number
Optional
By default, TTL is 20.
The sendpacket passroute
command voids the ttl
command.
Configure the automatic test
interval
frequency interval
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test will
be made.
To Next Page
Loading...
