AAA and RADIUS Protocol Configuration 225
Problem Diagnosis The Switch 4500 provides debugging of RADIUS. Terminal debugging can be
enabled with the command:
<4500-xx>terminal debugging
Once enabled, different debug traces can be enabled to the terminal. For example,
to turn on RADIUS debugging, enter the command:
■ <4500-xx> debugging radius packet
3Com-User-Access-Level This determines the Access level a user will have with Switch login. This can be
administrator, manager , monitor or visitor.
You may need to add the return list attributes to a dictionary file using the
following information:
VENDOR 3Com 43
ATTRIBUTE 3Com-User-Access-Level 1 Integer 3Com
VALUE 3Com-User-Access-Level Visit 0
VALUE 3Com-User-Access-Level Monitor 1
VALUE 3Com-User-Access-Level Manager 2
VALUE 3Com-User-Access-Level Administrator 3
To Next Page
Loading...
