3Com Switch 4500 26-Port - Adding a 3 Com Switch 4500 as a RADIUS Client

388 APPENDIX C: AUTHENTICATING THE SWITCH 4500 WITH CISCO SECURE ACS
Adding a 3Com
Switch
4500 as a RADIUS
Client
Once logged into the Cisco Secure ACS interface, follow these steps:
1 Select Network Configuration from the left hand side
2 Select Add Entry from under AAA Clients.
3 Enter the details of the 3Com Switch.
Spaces are not permitted in the AAA Client Host name.
An example is shown below
4 Select Submit. Do not restart the ACS server at this stage