3D Systems BFB-3000 User Manual

BFB-3000 Set Up and Operations Manual
Document No: D100253 69
Push reel filament down
delivery tube, from the
nut end
Hold tube in a coil
to match the
natural bend of the
filament, making it
easier to push out
the trapped
segments of
filament.
Once all the trapped
segments have been
pushed out, continue
to push the reel
filament through so
that approximately
5 cm protrudes at
both ends. Then cut
the reel filament to
detach the
arrangement from
the reel.

3D Systems BFB-3000 Specifications

General

Brand	3D Systems
Model	BFB-3000
Category	3D Printers
Language	English