3D Systems BFB-3000 User Manual

BFB-3000 Set Up and Operations Manual
Document No: D100253 70
Tape up on non-nut end
of the tube so that the
filament cannot move in
the tube.
Insert the taped end
back down inside the
energy chain from the
extruder end
Push the tube all the way back
down the energy chain. You may
need to move the extruders
around to massage the tube
through.

3D Systems BFB-3000 Specifications

General

Brand	3D Systems
Model	BFB-3000
Category	3D Printers
Language	English