Getting started
This chapter is designed to guide you through basic information you will need to begin logging your studies.
Checking the equipment
If your instrument was sent to you in a storage case, you will want to remove all the packaging and acquaint
yourself with the following equipment so you can quickly get started with your noise studies.
NOTE: Depending on the accessories you selected, the dosimeter may have the following components.
For the docking stations, you will either have an EdgeDock1 or an EdgeDock5. (For more information on
parts/accessories, please refer to www.3m.com/detection.)
Figure 2-1: Identifying your equipment
To Next Page
Loading...
