3M Edge eg5 - Figure 4-5: Splash Screen; Figure 4-6: Resetting the Edge from the Keypad; Resetting the Dosimeter

Overview of running a study
Resetting the dosimeter
32
Resetting the dosimeter
The Edge can be reset through the dosimeter keypad or via DMS. The steps below outline how to reset
your dosimeter.
 Reset
1. Ensure the meter is Off.
2. Turn the meter on by pressing the button.
3. When the splash screen appears, press and hold the and buttons until the splash
disappears.
Figure 4-5: Splash screen
4. The Setup menu appears on the Edge. Press the up or down arrow to select the reset icon
(symbol).
 NOTE: Setup menu is used to reset the dosimeter, change the contrast, and return to the main
view.
Figure 4-6: Resetting the Edge from the keypad
5. Press and hold the button.
6. A 3, 2, 1 countdown will appear, and then a shaded bar will appear indicating the dosimeter is being
reset.
7. Press the down arrow until the checkmark icon is selected (denoted by the arrows). Then, press the
button to return to the measurement view screen.
Edge Splash screen
Arrows and enter key
Indicates the valid keys are
selected
Checkmark icon
Is the selection to exit
the setup menu
Reset icon
eg5