5. Select Noise Dosimetry (see 1), Edge (see 2), and Edge 5 (see 3). Select the docked Edge (s) to download
(see 4).
6. Click button.
In the status field, it will state download is successful.
Then, a clear the memory prompt will appear. Click yes to clear the memory or click no if you wish to
save the data on the dosimeter.
7. The sessions (files) will load and post to the Data Finder page under Family: Noise Dosimetry heading.
Figure 5-2: Downloading in DMS
Figure 5-3: Downloading in DMS with the Edge
To Next Page
Loading...
