3M Edge eg5 - Getting Started; Powering On the Dosimeter

Turning on
eg5 Overview
8
Turning on
1. To turn on the Edge, press the on/off and enter button.
 The Edge splash screen (see Figure 2-3 for an example, page 10) will appear indicating the model
(i.e. “eg5”) and firmware version. The screen will be in the measurement view.
Figure 2-2: Powered on with measurement view displayed
View
Displays measurement values, battery
information, and calibration information
LED Indicator
Battery indicator icon
If icon is fully shaded, this indicates full
battery power (approx.35+ hours)