3M Edge eg5 - Adjusting the Contrast on the Edge; Figure 4-7: Changing the Contrast from the Keypad

Overview of running a study
Adjusting the contrast on the Edge
33
Adjusting the contrast on the Edge
 Contrast
1. Ensure the meter is Off.
2. Turn the meter on by pressing the button.
3. When the splash screen appears, press and hold the and buttons. (See figure 4-5 for
splash screen.)
4. The Setup menu appears on the Edge. Repeatedly press the arrow key until the Contrast symbol is
selected.
 NOTE: Setup menu is used to reset the dosimeter, change the contrast, and return to the main view.
Figure 4-7: Changing the contrast from the keypad
5. Next press the button.
6. A number will appear on your display (i.e., 50). Press the up or down arrow to increase or decrease
the contrast of the Edge.
7. Press button to accept the new contrast value.
8. To return to the measurement view screen, press the down arrow and press the button.
Checkmark icon
Is the selection to exit
the setup menu
Contrast icon
Arrows and enter key
Indicates the valid keys are
selected