3M Edge eg5 - Docking Station Operation; Powering the EdgeDock

Docking station functionality
Powering EdgeDock1 or EdgeDock5
13
Powering EdgeDock1 or EdgeDock5
 Powering EdgeDock1 or EdgeDock5
1. Assemble the charger adapter and plug adapter as illustrated in Figure 2-5. (It will be the same
process for an EdgeDock5.)
2. Plug the charger adapter directly into the wall (electrical wall plate).
3. Plug the opposite end into the power connector (or jack) of the EdgeDock1.
 NOTE: an amber, solid light will appear indicating power to the charger.
Figure 2-6: Attaching charger adapter to EdgeDock1
EdgeDock1 LED indicator
Amber light indicates “ON”.
Charger adapter cord