3M Edge eg5 - Display and Keypad Overview; Keypad and Display Diagram

Display and keypad
Diagram
10
Display and keypad
The keypad is used to run and stop your studies, view your measurement values, and power on and off the
dosimeter.
Diagram
The following diagram explains the features on the display and keypad.
Figure 2-3: Edge Keypad
Display (Splash screen shown)
 View data and various indicators
Up Arrow
 Used to scroll through
display/screen views
On/Off and Enter
 Used to power On/Off the meter.
 Used to switch between (toggle)
dosimeter one and dosimeter two
measurements and settings.
Down arrow
 Used to scroll through
display/screen views
Run and Stop
 Used to activate meter when running or
logging measurements.
 Used to Stop your noise study.
LED indicator
 Red – indicates dose exceeded the alarm level
 Amber – dosimeter stopped
 Green – dosimeter measuring
Windscreen and microphone