41 Technical Support
Technical Support
Setting up and Viewing C-A measurements
With the eg5 model, you have the option of enabling c-a measurement and viewing the values in tables
and charts (also called “panels”).
For your setup parameters, c-a is selected via the Setup button of DMS’s dosimeter screen. A quick
checkmark of C minus A activates this measurement and is viewable on the display if it is turned on in
the Display screen (refer to “Dosimeter setup” or “Customizing your views” for more information.) Your
setup parameters should look similar to the figure below.
Figure 6-1: C-A measurement set-up
To Next Page
Loading...
