3M Edge eg5 - Getting Started; Turning Off the Dosimeter

Turning off
LED indicator
9
LED indicator
There is a three-color LED indicator on the Edge, located to the right of the 3M logo.
Table 2-1 explains when and why the LED indicator color will appear.
 NOTE: The LED indicator can be disabled via DMS (see section, “Explanation of setting LED in DMS”.)
Table 2-1: LED indicators explained
Navigating
Once the dosimeter is “Powered-On”, press the up/down arrows to navigate through the
measurement values and battery run time.
Turning off
1. Press and hold the on/off and enter button.
 A “3, 2, and 1” countdown will appear as the dosimeter is powered off.
 NOTE: To halt the power off mode, simply release the on/off enter button.
LED indicator
Explanation
Red
A flashing red LED indicates the dose has exceeded the alarm level.
Amber
A flashing amber LED indicates the dosimeter is stopped and has not exceeded the
dose alarm level.
Green
A flashing green LED indicates the dosimeter is running and has not exceeded the
dose alarm level.